Sagrad,Inc - Services

RF System Analysis

Sagrad will provide detailed system analysis insuring the RF system architecture will meet the system specification. Key parameters will be identified and tracked in a compliance matrix to ensure all key specifications will be met by the final design. Often there are independent simulations required for areas such as PLL, TX system and RX system. Frequently these simulations may include AGC lock levels and LNA switching points. Sagrad will sweep the power over input and output ranges and report noise, AGC range, compression point margin using the correct PAR and noise analysis. Typical, worst case, and best case analyses will be performed to insure all products will meet the specifications during a high volume production run.

We use a custom simulation tool which allows rapid analysis. If it is available to the customer, we can follow our analysis up with common tools such as HP-ADS.

Consulting services

Areas of Specialty

RF System Analysis

		Consulting services Technical Oversight Competitive Analysis Manufacturing Experience Patent Review Project Definition System Specification System Architecture RF System Analysis Rapid Prototypes Areas of Specialty Simple Antenna Analysis Part 15 FCC Compliance High Volume Production Design Techniques IEEE 802.11(a/b/g/n) Standard Interpretation IEEE 802.11 Product Performance Comparison High Volume Production Testing Design Expectations for High Volume Computer design Cell Phone 802.11 Design Requirements Laminate and LTCC Module Design Process RF System Analysis Sagrad will provide detailed system analysis insuring the RF system architecture will meet the system specification. Key parameters will be identified and tracked in a compliance matrix to ensure all key specifications will be met by the final design. Often there are independent simulations required for areas such as PLL, TX system and RX system. Frequently these simulations may include AGC lock levels and LNA switching points. Sagrad will sweep the power over input and output ranges and report noise, AGC range, compression point margin using the correct PAR and noise analysis. Typical, worst case, and best case analyses will be performed to insure all products will meet the specifications during a high volume production run. We use a custom simulation tool which allows rapid analysis. If it is available to the customer, we can follow our analysis up with common tools such as HP-ADS.